40 grams of your favorite coffee refinery beans
kettle filled with 650 grams of water
1) Grind Coffee
Grind your favorite Bold Bean coffee to a coarse grind
2) Heat Water
Heat your kettle to 198 to 205 degrees Fahrenheit.
3) Preheat French Press
Pour a bit of hot water into your French press’ brewer. Give it a swirl to preheat the glass. Discard water.
4) Distribute Grounds
Pour ground coffee into your French press. Give the glass a little shake to distribute the bed evenly.
5) Start the Bloom
Pour 60 grams of hot water over the bed of coffee grounds. This should fill your French press about a quarter of the way to the top. Pause your pour for 30 seconds and allow the grounds to bloom.
Add an additional 540 grams of water, or however much it takes to fill the brewer to the top. Place the lid on the brewer, plunger raised, and brew for an additional three minutes.
7) Stir and Plunge
When your three minutes of brew time have passed, remove the lid to give the coffee a quick stir. Place the lid back on the brewer and gently push the lid’s plunger down to press the coffee grounds to the bottom of the brewer.
After a total brew time of four minutes, immediately pour the coffee and enjoy!